Agentless VMware Backup Architecture and Data Flow
Architecture and data flow are described in the following topics.
Agentless VMware Backup Node Types
In addition to the Catalogic DPX Master Server, the following types of nodes are involved in Agentless VMware Backup.
Proxy servers
VMware vCenters
VMware ESXi servers managed by VMware vCenter
VMs
Catalogic vStor, the Catalogic DPX Open Storage Server, or the NetApp storage systems (STORAGE_CTL nodes)
Agentless VMware Backup does not require the Catalogic DPX installed on vCenter, hosts, and VMs. The following table summarizes requirements for installation or configuration on the different types of nodes:
Node | Requires Catalogic DPX Installation | Requires Adding to the Enterprise |
---|---|---|
Virtualization proxy servers | Yes, with Virtualization Proxy Server installation setup type selected. | Yes |
VMware vCenter nodes | No | Yes |
ESXi servers | No | No |
VMs | No | No |
Catalogic vStor Server or NetApp storage system nodes | No | Yes |
Backup Architecture: SAN, LAN (NBD), and HotAdd
Backup over a SAN or VMware HotAdd is recommended for superior performance. SAN has significant advantages over LAN (NBD):
Impact on ESX server processing is reduced. On a LAN, the ESX server needs to read VMDKs and transfer them to the proxy server. On a SAN, the proxy servers read directly from storage, bypassing ESX servers.
Network contention is reduced.
Network transmission time is reduced.
Fewer connections are required on the vSphere server.
For many small- to medium-sized companies, LANs are cost-effective. In such environments, Agentless VMware Backup can be easily deployed for LAN backup, though performance is constrained by the LAN.
For HotAdd transport mode, vStorage APIs use the SCSI hot-add functionality of the ESXi host to mount a virtual machine’s associated virtual disks to backup storage, such as the Catalogic vStor server, for backup jobs. Using HotAdd requires that SCSI disks be used.
Last updated